Slip Ring PMP

• Metal housing
• 18 to 42 rings
• Mixed executions
• Option: rings with 50A, gold and silver coated rings, absolute encoder, micro switch, cable with connector, compressed air feed through

The characteristic feature of our slip ring PMP can be seen in the robust housing. It can be adopted flexible to the particular requirements by its different cover heights. Various materials for rings and brushes allow the transmission of high electrical power, of signals and of data for different BUS-systems.

The bottom of the housing is made of aluminium; the cover is made of steel. Overall five different cover heights are available which are chosen regarding to the number of rings demanded.

The cable entries of the rings are integrated axial; the entries of the brushes are integrated radial. The division of rotator and stator happens in the centre of the base part. In a radius of 75mm the rotating central pipe is located with the above inside the housing mounted rings on it. The brushes are fixed on top of the base part. The simple construction of PMP allows the customer to define the rotating and non-rotating part, or even to define both parts as rotating.

The cable exit of the brushes is realized by two radial cable glands at the side of the housing. The cables of the rings are led through the central pipe with an inner diameter of 42mm.

Two different module sizes with power ratings of 20A and 50A are available. Rings and brushes are made of copper-graphite and can be covered with a silver or gold coating. This leads to a higher contact performance and influences the abrasion characteristics in a positive way.

The slip ring PMP is also the base for several accessory parts like absolute encoders, micro switches or an additional media lead-through.